Vanity ***Update***

February 15, 2017  •  Leave a Comment

Another side project. I was given a request to build a vanity. 

The inspiration came from this link from Shanty 2 Chic. But it needed to fit a 30" wide sink rather than the 24" displayed in the photo. 

 

Then I was told not to put the cross (or X) on the front or sides and to make it look more like the photo below. OK. 

Once the sink was picked out, I had the dimensions I needed to work with. 

I started with the sides. Here is one.

Here is the other. The plans call out for pocket holes and screws. It make for an ugly inside so I used biscuits instead. 

Then i put the front and back rails on.

Added some detail to the side. 

Made the door.

Here is is, completed. I turned it over and the owner stained it.

Here is what it looks like finished. 

 

Here is a pic of it installed. 

Version 2Version 2

 

More later...


Comments

No comments posted.
Loading...